4
Instruction Manual
•
iPhone time is automatically updated to the correct time via cell phone towers, the
time on you iPod is accurate only to the time on the computer the last time the
iPod was synced to it. It’s possible to have up to 59 seconds difference between
the clock radio and synced iPod / iPhone.
Setting Clock Time (manually)
•
With the power off, press and hold the clock set / memory button ; “12 Hr” will
blink. Press the Tune UP or Tune DOWN button to set the unit to the 24 hour (24
Hr) mode or 12 Hour (12 Hr) mode.
•
Press the clock set / memory button and the hours will blink.
•
Press the Tune UP or DOWN to set the current hour, then press the clock set /
memory button again; the minute digits will blink. Press the Tune UP or Tune
DOWN to set the current minutes.
•
When done and you press clock set / memory button once again and the display
time will blink 4 times to indicate the current time is set.
Setting Alarm Time
•
To preview the alarm time. Press the ALARM button once.
•
While the display is showing the alarm time and you hold the ALARM button for 3
seconds and the hours will blink.
•
Press the Tune UP or Tune DOWN to set the alarm hour.
•
Press the ALARM button again; the minute digits will blink. Press the Tune UP or
Tune DOWN to set the alarm minutes.
•
Press the ALARM button and you can change the sound mode (Buzzer, Radio,
iPhone / ipod) for the alarm.
•
Press Tune UP or Tune DOWN to choose different sound mode. The alarm volume
will gradually increase. Then press the ALARM button when done.
•
To delay the alarm, press SNOOZE. It will come on again in approx. 9 minutes. You
may repeat this cycle several times during the alarm cycle. To stop the alarm. press
ALARM button .
•
To stop the alarm from coming on the following day, hold the ALARM button
to turn it off. The alarm icon
or
will disappear to indicate the alarm is
disarmed.
Note :
To wake to iPhone / iPod, your iPhone / iPod must be properly docked and off
or no alarm will sound.
Note :
If you select wake to iPhone / iPod but no iPhone / iPod is present, the alarm
will automatically switch to buzzer alarm.
Listening to your iPhone / iPod
When the iPhone / iPod is docked and in standby mode, press the function button to
select iPod/iPhone mode. The iPhone / iPod icon will appear on the display.
Charging your iPhone / iPod
When you docked your iPhone / iPod and it recharges (until fully charged).
Note :
iPod Shuffles will NOT charge.
Listening to Radio
•
Press the On/off button to turn the unit on.
•
Press the FUNCTION button to select the Radio Mode.
•
Use the Tune UP or Tune DOWN button to select the desired FM station. If you
press and hold the Tune UP or Tune DOWN button for one second, then release,
the unit will automatically scan to the next broadcasting station.
•
Press the On/Off button to turn the radio off.
To Set/Recall the radio presets
•
Press the On/off button to turn the unit on.
•
Press the FUNCTION button to select the Radio Mode.
•
Use the Tune UP or Tune DOWN button to select the desired FM station.
•
Press the clock set/memory button; “P01” will blink in the display.
•
Press the clock set/memory button again to set the preset. Repeat steps 2 through
4 to set more presets.
•
The unit can preset 20 station totally for FM.
•
When “P01-P20” is blinking, press Tune UP or Tune DOWN to select the Preset
number.
•
When recalling preset stations, press Mem –up to select the Preset number.
Summary of Contents for CL-1460
Page 2: ...2 ...
Page 30: ...30 ...
Page 31: ...31 ...
Page 32: ...Tristar Europe B V JulesVerneweg 87 5015 BH Tilburg The Netherlands www tristar eu CL 1460 ...
