background image

4

AC6C

Specifications

Woofer

Tweeter

Frequency Response

Impedance

Sensitivity

Power Capacity

Outer Dimension

Cut Out Dimension

Mounting depth

6.5” Carbon Filled Poly Cone with Butyl Rubber Surround

Pivoting 19mm Silk Dome

60Hz to 20kHz

8 ohm

90dB, 2.83v @ 1m

10 to 150 Watts 

9” (229mm) diameter

7 3/4” (197mm) diameter

3 1/4” (83mm)

AC8C

Specifications

Woofer

Tweeter

Frequency Response

Impedance

Sensitivity

Power Capacity

Outer Dimension

Cut Out Dimension

Mounting depth

8”  Carbon Filled Poly Cone with Butyl Rubber Surround

Pivoting 19mm Silk Dome

 

55Hz to 20kHz 

8 ohm

90dB,  2.83v @ 1m

10 to 150 Watts 

10 1/4” (260mm) diameter

9 1/8” (236mm) diameter

3 5/8” (92mm)

Two Year Limited Warranty

AudioSource, a division of Peak Audio Group, warrants this product against defects in materials and workmanship for a 

limited period of time. For a period of two (2) years from date of original purchase, we will repair or replace 

the product, at our option, without charge for parts. Customer must pay for all labor charges associated with 

the removal and re-installation of speakers for the limited period and all parts and labor charges after the 

limited warranty period expires. The limited warranty period for factory refurbished products expires after 

ninety (90) days from date of original purchase. This limited warranty applies only to purchases from authorized 

AudioSource Retailers or Distributors. This limited warranty is extended only to the original purchaser and is 

valid only to consumers in the United States.

Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource

Retailer or Distributor when making a claim against this limited warranty. This limited warranty only covers 

failures due to defects in materials or workmanship that occur during normal use. It does not cover failures 

resulting from accident, fire, flood, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty 

installation, modification, service by anyone other than AudioSource, or damage that is attributable to Acts 

of God. It does not cover costs of transportation to AudioSource or damage in transit. The customer should 

return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return 

Authorization.

Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a 

product prove to be defective in workmanship or material, the consumer's sole remedies will be repair or 

replacement as provided under the terms of this warranty. If the defective product is discontinued AudioSource 

may replace the product with an equivalent or superior product at its option. Any cost of re-installation 

or repair of wall or ceiling surface is the sole responsibility of the customer and that cost shall not be the 

responsibility of AudioSource. Under no circumstances shall AudioSource be liable for loss or damage, 

direct, consequential or incidental, arising out of the use of or inability to use the product. There are no 

express warranties other than described above.

Summary of Contents for AC6C

Page 1: ... the speakers to the listening position See Figure 1 If the room s dimensions or furniture placement prevent adhering to this requirement the tweeters in the AC Series speakers can be swiveled to aim them at the desired listening position New Construction If you are installing your speakers in new construction before the finished walls go up AudioSource offers New Construction Brackets which provi...

Page 2: ...ng the Speakers Installation Tip To further enhance the performance of your AC Series speakers the ceiling joist cavity where you plan to place your speakers can be stuffed with a generous quantity of fiberglass insulation Stuff the area in front of and behind the speaker opening with 6 thick insulation to a depth of approximately 2 feet beginning 1 foot in front and 1 foot behind the speaker open...

Page 3: ...0 or less 16 Gauge 2 Cond CL3 Rated 50 150 12 Gauge 2 Cond CL3 Rated 150 200 10 Gauge 2 Cond CL3 Rated To prevent sonic degradation in your AC Series speaker installation total speaker wire resistance should be kept below 0 5 ohms The following table lists recommended speaker wire gauge versus wire run length Using gentle pressure swivel the tweeter to aim the axis of the tweeter toward the listen...

Page 4: ...e original purchaser and is valid only to consumers in the United States Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource Retailer or Distributor when making a claim against this limited warranty This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use It does not cover failures resulting...

Reviews: