background image

Summary of Contents for AD3002

Page 1: ...20kHz Lowpass filter 60dB 1kHz referred to 150W output into 8 ohms Variable 350mV to 2 8V for rated power into 8 ohms 12dB 100Hz and 10kHz AC Power Consumption 750W maximum Net Weight Bibs I 3 6kgs Gross Weight 111bs I 5 0kgs AudioSource 13970 SW 72nd Ave Portland OR 97223 503 914 4688 www audiosource net 10 0 252mm Congratulations on your purchase of the AudioSource AD3002 Please take a few momen...

Page 2: ...from being walked on or pinched particularly at the plugs convenience receptacles and at the point of exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the cart apparatus combination to avoid inj...

Page 3: ...Panel 3 Balance Fades speaker output between the Right and Left Channels 4 Volume Trim This rotary encoder adjusts amplifier volume from 12dB to 6dB relative to the Level Controls on the back panel This rotary encoder is a digital control and functions in parallel with the unit s remote control It will freely spin continu ously Note each click felt when this control is turned will represent a 1 dB...

Page 4: ...lume Controls such as the AudioSource AE1 OOVC please ensure the switch setting is correct for the number of Volume Controls used Mis matching the control can lead to amplifier shutdown In add ition if the amplifier shuts down momentarily at high volume levels the maximum wattage is being exceeded by the amplifier and the volume should be reduced If clicking or popping sounds come from the speaker...

Reviews: