background image

GRP8 Specifications

Woofer
Tweeter
Frequency Response
Impedance
Sensitivity
Power Capacity
Outer Dimension
Cut Out Dimension
Mounting depth
Weight

8” mica filled poly cone with butyl rubber surround
Pivoting 25mm Ferro-Fluid cooled tweeter
45Hz to 20kHz +/- 2.5dB
8 ohm
89dB
100 Watts Peak
10.75” (273mm) diameter
9.3” (236mm) diameter
3

.6

” (92mm)

12.3 lbs. (5.6Kg)

Woofer
Tweeter
Frequency Response
Impedance
Sensitivity
Power Capacity
Outer Dimension
Cut Out Dimension
Mounting depth
Weight

8” mica filled poly cone with butyl rubber surround
Pivoting 25mm Ferro-Fluid cooled tweeter
45Hz to 20kHz +/- 2.5dB
8 ohm
89dB
100 Watts Peak
10” x 14.13“ (254mm x 359mm) 
8.75” x 12.75

“ 

(222mm x 324mm)

3

.38

” (85.75mm)

12.3 lbs (5.6kg)

AS8C 2 each included

AS8S 3 each included

4

A Division of Phoenix Gold International, Inc. •  9300 North Decatur Street  •  Portland, Oregon 97203  •  Tel: 503.286.9300  •  Fax: 503.978.3380

8100.0317A

Summary of Contents for AS GRP 8

Page 1: ...maintained at ear level or just slightly above Again the tweeters may be aimed into the listening area New Construction If you are installing your speakers in new construction before the finished walls and ceilings go up Audio Source offers Pre Construction Brackets Part NCB W8 and NCB C8 that provides a stable frame that can AS GRP 8 In most modern buildings the wall studs are positioned on 16 ce...

Page 2: ...aker opening with 6 thick insulation to a depth of approxi mately 2 feet beginning 1 foot above and 1 foot below the speaker opening If the insulation is foil or paper backed face the backing away from the GRP8 speaker The addition of this insulation will help to prevent the unwanted transfer of sound into the otherwise large and resonant cavity of the uninsulated wall or ceiling It is now time to...

Page 3: ... defects in materials and workmanship for a limited period of time For a period of two 2 years from date of original purchase we will repair or replace the product at our option without charge for parts Customer must pay for all labor charges associated with the removal and re installation of speakers for the limited period and all parts and labor charges after the limited warranty period expires ...

Page 4: ...3 lbs 5 6Kg Woofer Tweeter Frequency Response Impedance Sensitivity Power Capacity Outer Dimension Cut Out Dimension Mounting depth Weight 8 mica filled poly cone with butyl rubber surround Pivoting 25mm Ferro Fluid cooled tweeter 45Hz to 20kHz 2 5dB 8 ohm 89dB 100 Watts Peak 10 x 14 13 254mm x 359mm 8 75 x 12 75 222mm x 324mm 3 38 85 75mm 12 3 lbs 5 6kg AS8C 2 each included AS8S 3 each included 4...

Reviews: