Speaker Mounting
Two sets of accessories are provided with the feet and brackets. Depending
on how you chose to position the speakers, you will probably want to use one or the other.
The self-sticking feet will protect the surface the speaker is resting on, and will prevent the
speaker from vibrating and sliding. Simply peel the paper backing off and press the adhesive
surface on to the LS 100 cabinet. Be sure
the feet are applied to the side on which
the speaker will be resting.This method is
appropriate for mounting on a bookshelf
or speaker stand.
Heavy duty brackets are also in-
cluded. These allow you to tilt, or "aim"
the speakers into the listening area. Mount
the "U" shaped part of the bracket first,
using the enclosed weather proof hard-
ware. Soft pads have been provided for
the inside edge of this "U" shaped bracket
to protect the speakers from scratches. If
other hardware is to be used outdoors,
make certain that it is also weather proof,
or rust stains may occur. Next, attach the
speakers to the brackets, using the big
hand knobs. Tighten down carefully and
slowly, and do not over tighten. The LS
100 speakers also include a "key-hole type" mounting hook to instantly mount the speakers
to a wall. For safety, always mount these speakers on a wall that is reinforced from behind.
Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are
unsure, consult a professional contractor.
Warranty
We at AudioSource would like to thank you for choosing our product. You can take
pride in owning this quality crafted unit; we take pride in having built it. AudioSource
speakers carry a Five Year Warranty. Please read your warranty. It is valuable to you as well
as to any subsequent owner during the term of the warranty. The transferability of the
warranty is an unusual feature, and that is why we claim we warrant the product, not just the
purchaser. We have tried to supply as much information as we could; but remember, if you
need assistance with our products, we are here to help.
2.
