Speaker Mounting
If your application requires the LS 300 speakers to be mounted, please follow these directions.
Using the hardware supplied, mount the brackets first. To prevent scratching of the speakers, apply the enclosed
self-adhesive pads to the insides of the brackets. Finally, attach the speakers to the brackets using the large plastic
knobs supplied.
Never mount a speaker on a wall made of unreinforced drywall or plasterboard.
If you are unsure, con-
sult a professional contractor.
Please note that if the LS 300 speakers are to be placed on a bookshelf, speaker stand or equivalent, we have also
provided self-adhesive foot pads to protect and immobilize them on most surfaces.
Note: If any part of this product is
damaged or missing, do not contact your AudioSource dealer. Please call AudioSource directly at 800-435-7115.
Hooking It Up
The gold-plated binding posts on the LS 300 speakers will accommodate nearly any type of connector. For bare
wire, press the binding post
in
to reveal the
eye
. Thread the wire into the
eye
, and release the
spring-loaded
connector
. For banana plugs, simply insert the banana plug into the end of the connector. The binding post speaker
terminals on the LS 300 speakers will accommodate up to 14-gauge wire.
When connecting the speakers, it is very important to observe the correct polarity. This means that the wire
attached to the
+
,
red
, or
positive
terminal on one component must be attached to the
+
,
red
, or
positive
terminal
on the corresponding component's speaker output terminals. Similarly, the
–
,
black
,
negative
, or
ground
terminals
must connect to the respective
–
,
black
,
negative
, or
ground
terminals. This is easy to do by locating the color,
stripe, or ribbing that appears on most wire.
Warranty
AudioSource speakers have a two-year, transferable warranty. Please read the enclosed warranty card. It is valuable
to you as well as any subsequent owner during the term of the warranty.
9300 North Decatur
Portland, OR 97203
Tel. 503.286.9300
Fax 503.978.3302
audiosource@Phoenixgold.com
www.audiosource.net
© 1999 AudioSource, Inc.
LS 300 Specifications
This manual provides detailed instructions for setting up your equipment.
We also offer friendly, toll-free assistance.
1.800.HELP.115
Frequency Response: . . . . . . . . . . . . . . . . . . 80 Hz - 20kHz
Power Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . 100 watts
Impedance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ohms
Sensitivity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB
Woofer: . . . . . . . . . . . . . . . . . . . . . . . . . . 4" Polypropylene
Tweeter: . . . . . . . . . . . . . . . . . . . . . . . . 3/4" Polycarbonate
Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . 8.5" x 6" x 6"
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 lbs.
