Audiotec Fischer MATCH UP C42MB-FRT, Manual

13

Installation of the UP X4MB-FRT

The  UP X4MB-FRT  is  a  2-way  coaxial  system, 

which will be installed in the original midrange 

speaker position. After you have dismantled the 

cover, you can remove the original midrange speak-

er. Then connect the UP X4MB-FRT to the original 

speaker cable harness and insert it into the original 

mounting position (see figure page 12, refer to item 

“Installation of the UP C42MB-FRT”).   

Installation of the UP S4MB-CTR / UP S4MB-SUR

The center speaker UP S4MB-CTR and the sur-

round speakers are fullrange speakers, which will 

be mounted in the original speaker locations. After 

you have dismantled the cover, you can remove 

the original fullrange sepaker. Then connect the 

MATCH UP S4MB-CTR / UP S4MB-SUR to the 

original speaker cable and insert it into the original 

mounting position.

Important: 

The center speaker is equipped with 

two equal connection terminals. For audio transmis-

sion only one terminal is required. If there is no mu-

sic-playing center speaker or if there is an additional 

amplifier as recommended, use the enclosed cable 

to connect the signal source. The other terminal 

must only be connected if the car is equipped with 

a  SOS  emergency  call  function  ex  works.  Please 

refer to the user manual of the vehicle.

Installation of the UP S4MB-SUR / UP S4MB-CTR:

Important:

 Make sure that all anchoring supports of 

the speaker are correctly engaged.  

Installation of the UP W8MB-S4

For the installation of the front subwoofers you have 

to remove the splashback cover in the front footwell. 

Then connect the MATCH UP W8MB-S4 subwoofer 

to the original speaker cable harness, insert it into 

the  original  mounting  position  and  fix  it  with  the 

screw nuts.  

Installation of the UP W8MB-S4:

The enclosed universal connection cables with 

50 cm / 1.64´ and 1.5 m / 4.92´ length can be used 

e.g. for connecting an optional amplifier.