12
RCA type unbalanced analog output. Most of the time you will
be needed to connect these output ports for monitoring purpose.
One of the selected analog input sources will be routed to these
output ports along with internal wave out.
4. Digital Out
Coaxial type digital output port. You can use this output port for
transferring data in digital domain. For example, connecting to
DAT’s input port you can send stereo audio data without any loss
while you are monitoring through the analog output ports.
5. CD Audio Input
If your CD-ROM is equipped with a 4-pin analog audio output,
you can import CD audio signal directly to MAYA via this
connector. To use CD-ROM’s audio as your input source, select
CD Audio
as the
Input
selection on the
MAYA’s Control Panel.
