13
© AUDIOTRICITY 2014, ALL RIGHTS RESERVED
OWNER’S MANUAL
CHIMERA SIGNATURE
POWER
CONDITIONER
REAR PANEL
6
1
5
2
2
3
3
4
4
1.
32A NEUTRIK PowerCON input:
This is the Mains power input. You can use the power
cable provided with the Chimera Signature or you can use other after-market with 32A NEUTRIK
powerCON plug.
2.
High current outlets:
These outlets are designed with low frequency filtering and with
very low resistance to enhance the performance of power hungry components.
Max 16A each.
3.
Analog low current outlets:
These outlets are designed with medium frequency
filtering in order to improve performance of analog components.
Max 5A each.
4.
Digital outlets:
Specially designed to reduce high frequency noise that particularly
affects the performance of digital components.
Max 5A each.
5.
Central ground point:
Designed to connect all your system components ground at
this point providing the same potential for all. It reduces ground noise and breaks any possible
ground loop.
6.
Hydraulic breaker:
This is NOT a master ON/OFF switch. The breaker is designed to
protect the unit and the components in the event of an over-current event; you should NOT use
it as a master ON/OFF switch. Only use it to power ON/OFF the power conditioner if it will be for
long periods of time. Otherwise, the power conditioner should remain in operation.
7.
Serial Number:
Space reserved to unit serial number.
7
Summary of Contents for CHIMERA
Page 1: ...CHIMERA SIGNATURE EXCLUSIVE POWER C O N D I T I O N E R O W N E R S M A N U A L...
Page 2: ......
Page 4: ......
Page 6: ......