5
LOADING THE MAGAZINE INTO THE CHANGER
Completely slide the door on the changer to the right as shown in
Figure 3. Making sure the top of the magazine is facing upward,
gently insert it into the unit until it clicks into place, as shown in
Figure 4. Slide the door of the changer fully closed and the unit is
ready for operation.
REMOVING THE MAGAZINE FROM THE CHANGER
To remove the magazine, slide open the door on the changer and
press the eject button as shown in Figure 5.
NOTES:
•
Be sure to keep the door on the changer closed at all times
when not loading or removing the magazine. Leaving the door
open could allow dust, dirt and moisture to enter the changer
which could cause the unit to malfunction.
•
To assure proper playback, it is recommended that the CD
magazine be loaded with more than one disc.
•
When it becomes necessary to reset the changer circuitry
following system installation, or due to a changer error code,
the reset button (Figure 5) may be pressed to reinitialize the
microprocessor circuitry and resume normal changer
operation.
Fig. 3
Door
Fig. 4
Fig. 5
Eject Button
Reset Button
COMP
ACT D
ISC C
HANG
ER
DIGIT
AL AU
DIO 6
DISC
ACC31
BY AUDIOVOX
COMP
ACT D
ISC C
HANG
ER
DIGIT
AL AU
DIO 6
DISC
ACC31
BY AUDIOVOX
COMP
ACT D
ISC C
HANG
ER
DIGIT
AL AU
DIO 6
DISC
ACC31
BY AUDIOVOX
RESE
T
