BEFORE CALLING AUDIOVOX TECHNICAL SUPPORT (1-800-645-4994)
22
Before calling, check the following points for a possible cause of the trouble. A minor adjustment on your part may eliminate the
problem.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS
There is no power to the VCP.
No picture on screen when playing back a
recorded tape.
Noise bars on screen.
Operation key does not work.
Cassette is ejected upon inserting.
• The power cord is not connected.
• The polarity of power cord is not correct.
• The TV is not set to the video channel, 3
or 4.
• Tracking is not adjusted.
• If the cassette or the VCP is not in
normal condition, every LED indicator
lights and the VCP is inoperative.
• Safety device works to protect the
cassette when it is inserted incorrectly.
• Check the power cord.
• Change the polarity of power cord.
• Set your TV to the video channel, 3 or
4.
• Adjust for a clear picture by pressing
the PLAY button.
• Turn the power off and on by pressing
the POWER button.
• Unplug and re-plug the power cord.
• Pull the cassette out (unloading) and
insert it firmly into the cassette
compartment.