BASIC OPERATION
18
CASSETTE LOADING/UNLOADING
LOADING
UNLOADING
Œ
Push the cassette into the cassette compartment gently.
(Arrow mark at the top)
• An inverted cassette cannot be inserted.
´
The cassette-in indicator lamp is lit up.
• Upon inserting the cassette, the power turns on even if
the power was off as long as the DC power cord is
plugged in.
Œ
Press the STOP/EJECT key twice on the VCP (in the
PLAYBACK mode). This first press will stop the tape. The
second press will eject the tape. The cassette-in indicator
lamp will be lit out.
´
Pull the cassette out gently.
• When you press the STOP/EJECT key even if the power
is off, the cassette will be ejected.