BEFORE CALLING SERVICE PERSONNEL
26
Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your part
may eliminate the trouble.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS
There is no power to the VCP.
No picture on screen when playing back a
recorded tape.
Noise bars on screen.
Operation key does not work.
Cassette is ejected upon inserting.
Audio output does not change to Hi-Fi
mode.
• The power cord is not connected.
• The polarity of power cord is not correct.
• The TV is not set to the video channel, 3
or 4.
• Tracking is not adjusted.
• If the cassette or the VCP is not in
normal condition, every indicator
LED/LAMP lights up and the VCP does
not work.
• Safety device works to protect the
cassette when it is inserted incorrectly.
• The cassette is recorded in mono VCR.
• The first autotracking is executing until
now.
• Check the power cord.
• Change the polarity of power cord.
• Set your TV to the video channel, 3 or
4.
• Adjust the picture to be clear by
pressing the PLAY key.
• Turn off the power and on by pressing
the POWER cord.
• Unplug and replug the power cord.
• Pull the cassette out (unloading) and
insert it firmly into the cassette
compartment.
• The cassette can not be playback in Hi-
Fi mode.
• Wait for a second.
