- 14 -
Redial Feature
1. If you get a busy tone, press the TALK
button or place the Handset on the Base
Unit to hang up.
2. Later, press the TALK button again.
3. Listen for a dial tone.
4. Press the OPTION/RE/PA button. This
will automatically redial the last telephone
number you called.
5. When you have finished with your call,
press the TALK button again or place
the Handset on the Base Unit.
Call Transfer Feature
(For Two or More Handsets Only)
At Talk Mode - Press the SET button followed by Handset number you wish to transfer the call. i.e. The call is now on Handset 1
and you wish to transfer the call to Handset 2, to do this - Press SET button on Handset 1 and Press key number 2, both handsets
will ring, Handset 2 can take the call from Handset 1 by pressing the TALK button on Handset 2.
Handset Volume Setting
While the Handset is at TALK Mode, you can adjust the receiver volume by pressing the UP or DOWN button to Low, Medium
and High setting.
Mute Function
At Talk mode - Press and HOLD the UP arrow Key for 2 seconds to Mute the microphone on the handset, the LCD d will show
“MUTE” to indicate the handset Microphone is Temporarily turned OFF, the Called Party can not hear you. To go back to TALK
mode with the Called Party, Press and HOLD the UP arrow key for 2 seconds to go back to TALK mode, the handset LCD will
display “TALK”.
Multi Channel Access
Your cordless telephone lets you select a channel from 40 frequencies available to transmit signals between the base unit and the
handset. When you notice interference from other cordless telephones, change to another channel by pressing the
CHANNEL/CODE button on the handset.
Summary of Contents for AXT-2411
Page 32: ...32 AXT2411...
