Audiovox AXT-2411, User Manual

- 27 - 

TROUBLE SHOOTING 

Problem Solving Section

For your assistance, we have listed below a few common problems.

Phone does not work, check the following:

1.  Base Unit is plugged into a power source. 

2.  Handset is charged. 

3.  TONE/PULSE Select Switch is in the right position. 

4.  Telephone Line Cord is plugged into the Telephone Jack.

Range of phone limited, check the following:

1.  Base Unit is centrally located in your residence. 

2.  Base Unit is not located near appliances.

No dial tone, check the following:

1.  Telephone Line Cord plugs are connected to the Telephone Jack and Telephone Line 

 Connection 

Jack. 

2.  Base Unit is plugged into a power source. 

3.  If you had a power failure or had unplugged the Base Unit, replace the Handset on the 

Base Unit for 2 to 5 seconds to reset the system.

Received signal flutters or fades, check the following:

1.  Battery Pack in the Handset is fully charged. 

2.  Handset is not too far from the Base Unit.

Interference on reception, check the following:

1.  Noise may be picked up from electrical products in the home or electrical storms.   

Generally, this noise is a minor annoyance and should not be interpreted as a defect in 

 your 

system. 

2.  Choose an alternate channel using the     

Channel/Code

 button on the Handset. 

3.  Do not use this telephone within 20 ft. of a microwave oven while it is working, as you 

may experience interference. This is a normal occurrence with 2.4GHz phones and 

should not be interpreted as a defect in the product.

If after pressing the   Talk   button, you receive three “beeps” and no dial tone, check the following:   

1.  Base Unit is plugged into a power source. 

2.  If you had a power failure or had unplugged the Base Unit, replace the Handset on the 

 Base 

Unit.

NOTE:  

If none of the telephones in the house are working, disconnect one set at a time to 

verify    that none of the phones are causing the problem. If you still have a problem after doing 

this, and your telephone still does not work, please contact your local phone company.