2
2. Mount the Transceiver unit
To install the cellular telephone with the transceiver unit located in the trunk-space of the
automobile follow the steps outlined below.
a. Place the mounting bracket so that the
four bracket holes line up with the trans-
ceiver holes.
b. Replace the four screws (supplied M4
×
8mm) in the screw kit so that the mount-
ing bracket is secured to the transceiver
unit.
c. Place the unit top-side up (bracket feet
down), utilizing the included flatwashers,
insert the four self-tapping screws (M5
×
25mm is recommended) and tighten them
down.
Orange
Extension Cable
Power Cable
fuse 3A
fuse 1A
Red
Black
3. Wiring
a. Connect the cables to the mounted transceiver unit using the supplied trunk mount
extension cable as illustrated.
Car Battery
Ground (Black)
Back up (Red)
Ignition (Orange)
Extension cord
Hands-Free Mic
Cradle
Hand Set
Transceiver unit
Antenna
Antenna Terminal
Power Cable Socket
Microphone Unit Jack
Curly Cord
Socket
Inst.Guide̲body
02.4.3, 11:38 AM
Page 2
Adobe PageMaker 6.5J/PPC
