E - 21
CD/DVD OPERATION
PLAYING A DISC
1. Press the
STANDBY/ON
button to turn on the unit.
2. Press the
FUNCTION
button repeatedly to select DVD mode or directly to press
DVD
button on the remote,
then press the
ENTER
button.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the
PUSH OPEN
button
to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
“click”.
5. Push
the disc tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of DVD, or start playing the DVD. If the unit does not automatically start playing the
DVD, press the
PLAY
button.
PLAYING A PICTURE FILE DISC
This unit can play JPG fi les recorded on CD-R and CD-RW discs.
1. Press the
PUSH OPEN
button
to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
“click”.
3. Push
the disc tray to close the disc door.
4. The unit will load the disc and automatically display the contents of the disc on the screen, while also
beginning to play the picture fi le. These fi les will then be played back one by one.
5. Press the
STOP
button to go to the folder list.
6. Press the or button to highlight a fi le to play. Press the
PLAY
button to start playback.
NOTE
• You can press the
PAUSE
button to interrupt playback, and press the
PLAY
button to resume
playback.
• You also can use the
GOTO
function or use the numbered buttons to enter the image number to quickly
select any image.
• Press the
ANGLE
button on the remote control to rotate the picture orientation by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the
PAUSE
button. To resume normal playback, press the
PLAY
button. Each time you press
the
PAUSE
button, the picture advances one frame.
STOPPING PLAYBACK
Press the
STOP
button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the
PLAY
button.
If you press the
STOP
button twice, the unit’s memory will be cleared and pressing the
PLAY button
will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the
PREV
button to go back to previous chapters/tracks.
• Press
the
NEXT
button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited
operation during playback. For example, many DVDs do not allow users to skip government warnings,
or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction
notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted
by the unit or disc.
FPE1708DVS_UL_IMTK_E21-27.indd 21
FPE1708DVS_UL_IMTK_E21-27.indd 21
3/11/2008 10:41:43 AM
3/11/2008 10:41:43 AM
