Audiovox gx2400, Owner'S Manual

GX2400 English I/B ver. 09020A-1

  09020A-1                                                                                                                                     10

OWNER’S MANUAL#

GX2400

VER.09020A-1 

PAGE:   

10

    U.S. English Version 

 
 
9VDC Adapter Jack  
                                       

AC Outlet 

 
          Plug 
 
                                                         

9VDC Adapter  

(Figure 9) 

HANDSET BATTERY INSTALLATION

          
CAUTION:

Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use 
of other battery types may cause injuries or damage.

1. Remove the battery compartment cover of the handset. 
2.  Connect the rechargeable Ni-Cd battery as shown on Figure 10.

Handset  

Battery                        

Insert the End of the  

Compartment   

Battery Pack Wire                

RED Wire              

BLACK Wire  

 
                                                        (Figure 10) 

3. Insert the Ni-Cd battery into the battery compartment of the handset.

4. Slide the battery compartment cover firmly in its closed position.

INITIAL SETUP 

Before you can use your cordless telephone, the handset must be charged for at least 14 
hours. See charging instruction in the MAXIMIZING BATTERY LIFE section of this manual.   

TONE / PULSE SETTING 

Select the appropriate dialing service by moving the T / P  
(Tone / Pulse) switch on the bottom of the base unit: 

• 

(T) TONE for Tone service, or

• 

(P) PULSE for Rotary service.                                                                   

T / P 

                                                                                                                       (Figure 11)

RINGER ON / OFF SETTING