Audiovox GX2401c, Owner'S Manual

GX2401c I/B version 09050A-1

 09050A-1                                                                                                                                             14

OWNER’S MANUAL#

GX2401c 

VER.09050A-1 

PAGE:   

14

         English version 

Select the appropriate dialing service by moving the  
T / P (Tone / Pulse) switch on the bottom of the base unit: 

• 

TONE for Tone service, or 

• 

PULSE for Rotary service.                                                                   

T /  P

                                                          (Figure 11)

SETTING THE HANDSET RINGER ON / OFF

The handset ringer must be set to ring ON position in order to ring when receiving an 
incoming call. See PROGRAMMING MODE section on page 20.  

 
SETTING USER'S AREA CODE AND NEIGHBORING AREA CODE

SETTING USER'S AREA CODE AND NEIGHBORING AREA CODE 

In order to use callback function, the user's area code and neighboring area code 
must be programmed. Neighboring area code is optional. See PROGRAMMING MODE section 
on page 19. 
  
SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION 

SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION  

The CIDCW function must be set to ON position in order to use CIDCW function. See 
PROGRAMMING MODE section on page 19.  

TELEPHONE OPERATION

TO PLACE A CALL  IN TALK MODE  

1. Press the TALK button on the handset. The LCD Display  

will show "TALK" and the symbol 
will flash while the unit auto-scans 

   and will light steadily when it finds a clear channel.                 (Figure 12)                                            
2. Listen for a dial tone. 
3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter 

the number. 

4. When finished with your call, press the TALK button or place the handset on the base 

unit.  

TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)

1.  

Ensure that the unit is in standby mode. The handset and base unit IN USE LED 
indicator is off.

2.  

Dial the telephone number or press RE / PA button. If you make a mistake, press 

           button to delete the character on the left of the cursor.

3.  

Press C. BACK button. 

4.  

When finished with your call, press the TALK button or place the handset on the base 
unit.  

TO RECEIVE A CALL 
NOTE: 

If you are expecting incoming calls, the handset must be programmed to RING ON 

mode. See PROGRAMMING MODE section on page 20.

A.  

IF THE HANDSET IS ON THE BASE UNIT

1.  

Since the GX2401c features ”Auto-Answer”, simply pick up the handset from the base 
cradle when the phone rings. The LCD Display will show " TALK" and the 
symbol 

   will light steadily. 

2.  

Start your conversation. 

3.  

To end your conversation, either press the TALK button or place the handset on the base 
unit.