Audiovox GX2401c Owner'S Manual Download

Page: 21 / 30

GX2401c I/B version 09050A-1

09050A-1 20

OWNER’S MANUAL#

GX2401c

VER.09050A-1

PAGE:

English version

code or neighboring area
code.

B. CALLBACK OPTION 2

In this option, Callback dials 1+10 digits and your Call Record will be changed to 1+10 digits
automatically.

In standby mode or talk mode, press (+) or (-) button to see
your Call Record on the LCD Display.

Find the desired Call Record to dial.

Press and

hold

C. BACK button for about 2 seconds.

The unit will dial as shown on the table below.

     User's area code = 817

LCD Display

Number of Digits Called Back

7 digits

•

1 + user's area code + 7 digits

•

If the user's area code is not set, 7 digits will be called back.

10 digits

•

1 + 10 digits

11 digits

•

11digits

PROGRAMMING MODE

SUMMARY OF FUNCTION MODE

Function Code

Mode

Language Set (English, Spanish, French)

CIDCW ON / OFF Set

Area Code Set including Neighboring Area Code

Callback Number Set (07, 10)

Ringer ON / OFF Set

Time Set

Contrast Set (3 steps)

B. HOW TO CHANGE THE LANGUAGE

In standby mode, press SCAN / PRG button.

Press 1 button, or press (+) button once. The current language
is displayed.

Press or button to change the language.
The language scrolls as English Spanish French.

Press SCAN / PRG button to save and exit.

C. HOW TO SET CIDCW ON / OFF

The factory setting is CIDCW OFF.

Ensure that the base unit is power on.

In standby mode, press SCAN / PRG button.

Press 2 button, or press (+) button two times. The current
mode is displayed.

Press or button to change the mode.

Press SCAN / PRG button to save and exit.

456-7890
NAME

18174567890
NAME

ENGLISH

FRENCH

CIDCW OFF

CIDCW ON

Summary of Contents for GX2401c































Search results

Summary of Contents for GX2401c

Reviews:

Related manuals for GX2401c

Brands by name

Popular brands

Audiovox GX2401c, Owner'S Manual

Search results

Summary of Contents for GX2401c

Reviews:

Related manuals for GX2401c

Brands by name

Popular brands