GX2401c I/B version 09050A-1
21 09050A-1
OWNER’S MANUAL#
GX2401c
VER.09050A-1
PAGE:
21
English version
The symbol CW indicates that CIDCW is ON mode.
NOTE:
In CIDCW OFF mode, Call Waiting function will not operate.
D. HOW TO SET USER AND NEIGHBORING AREA CODE
1.
In standby mode, press SCAN / PRG button.
2.
Press 3 button, or press (+) button three times.
No area code is registered.
3.
Enter your 3 digits area code.
4.
If your area is not Split area, press SCAN / PRG button to
save and exit.
5.
If your area is one of the Split area, enter neighboring area
code.
817 = User's area code, 913 and 412 = Neighboring area
code.
6.
Press SCAN / PRG button to save and exit.
NOTE:
If the number is incorrect, press DEL button and restart on step 3.
E. HOW TO SET CALLBACK NUMBER
This is the number of digits to be called back when making a call using the Call Record and
when the area code of the incoming telephone number is same as your area code. Refer to
Callback Dial Operation on page 18.
The factory setting is 7 digits.
1.
Press SCAN / PRG button.
2.
Press 4 button, or press (+) button four times. The Callback
Number is displayed.
3.
Press or button to change the Callback Number.
The Callback number scrolls as 07 10 07.
4.
Press SCAN / PRG button to save and exit.
F. HOW TO SET RINGER ON / OFF
1.
In standby mode, press SCAN / PRG button.
2.
Press 5 button, or press (-) button three times. The current
mode is displayed.
3.
Press or button to change mode.
4.
Press SCAN / PRG button to save and exit.
G. HOW TO SET TIME
NOTE:
The time set is for the LCD Display time. If CALLER ID
signal comes in, the time will adjust automatically.
1.
In standby mode, press SCAN / PRG button.
2.
Press 6 button, or press (-) button two times. The current time is displayed.
3.
Enter 2 digits hour. The position to edit is blinking. Use button to delete error entry.
4.
Enter 2 digits minute.
5.
Press 1 for AM and 2 for PM.
6.
Enter 2 digits month.
7.
Enter 2 digits day.
8.
Press SCAN / PRG button to save and exit.
H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY
1.
In standby mode, press SCAN / PRG button.
2.
Press 7 button, or press (-) button once. The current contrast
is displayed.
3.
Press or button to change the contrast.
The contrast scrolls as 01 02 03 (Three steps).
4.
Press SCAN / PRG button to save and exit.
_ _ _ _ _ _ _ _ _
AREA CODE
817 _ _ _ _ _ _
AREA CODE
817 913 412
AREA CODE
10
CALLBACK NUMBER
07
CALLBACK NUMBER
RINGER ON
RINGER OFF
12:20 AM 10/20
TIME SET
02
CONTRAST
