Audiovox IPD-2FM, Owner'S Manual

11

To Use the IR Transmitter:

The IPD-2FM Rear Seat Entertainment Mount has a built-in two channel infrared audio transmitter 
for use with wireless Infrared Headphones (sold separately).

1. 

 Connect the power supply to the Universal Seatback Dock.

2. 

 Select CH A or CH B. The channel selected must match the channel of the Infrared Headphone 
(sold separately) that you are using.

Note:  If two IPD-2FMs are installed in a vehicle, set one unit to CH A and the other to CH B. Set 

the two channel headphones accordingly.

3. 

 For best audio quality, turn the volume of the iPad to maximum and adjust the wireless 
headphone volume to a comfortable listening level.

To ensure good reception:

The wireless IR Headphone must be used within a line of sight from the IR Transmitter as infrared 
transmission, like visible light, travels only in an unrestricted line of sight.

To disable the IR Transmitter when the power is connected and enable iPad speaker mode:

During Play Mode, press PAUSE, PLAY, PAUSE, PLAY, PAUSE, PLAY in sequence within three seconds.

To resume infrared transmission:

1. 

Remove the Protective Case from the Universal Seatback Dock.

2. 

 Reinsert the Protective Case on to the Universal Seatback Dock (this will reconnect the power 
supply).

IR Transmitter

(The IR Transmitter will turn on after the power is connected.)

Infrared Headphone

(sold separately)