Audiovox IPD-2FM, Owner'S Manual

9

To attach the Protective Case to the Universal Seatback Dock:

The Mounting Arm has six depth settings to 
allow for proper fi tting to the seat depending 
on the size of the headrest.

Warning!  Always make sure the Red Switch is in 

the UNLOCK position when inserting 
or removing the Mounting Arm, 
otherwise damage will occur to both 
units.

1. 

 Hold the Red Switch in the UNLOCK 
position.

2. 

 While holding the Red Switch in the 
UNLOCK position, insert the Mounting Arm 
into the slot in the Rear Bracket.

3. 

 Once the Mounting Arm is inserted into 
the Rear Bracket suffi

  ciently, release the 

Red Switch so that it returns to the LOCK 
position.

Warning!  Ensure the Mounting Arm is inserted 

and locked in the Rear Bracket before 
moving your vehicle.

4. 

 Adjust the tilt angle to the desired viewing 
position.

To remove the Protective Case from the Universal Seatback Dock:

1. 

 Hold the Red Switch in the UNLOCK 
position.

2. 

 At the same time, pull the Mounting Arm 
out of the Rear Bracket.

3. 

 When the Mounting Arm is fully removed 
from the Rear Bracket, release the Red 
Switch so that it returns to the LOCK 
position. 

Fully inserted and 
locked-in position

First locked-in position