-11-
5
BASS BOOST SELECTOR
This switch is used to accentuate the bass frequencies by adding 8 dB
of boost to the signal at 45 Hz.
6
SUBWOOFER LEVEL CONTROL
This control is used to adjust the output level from the “SUBWOOFER
OUTPUT” jacks. Set the control to the “MIN” position and slowly adjust
it until the desired level of subwoofer output is achieved for the amplifier/
speaker system being used.
NOTE:
This control will work in conjunction with the Remote Subwoofer
Level Control
br
. The correct setting of the control on the
crossover will allow full adjustment range of the Remote Control.
7
REAR MIDRANGE LEVEL CONTROL
This control is used to adjust the output level from the “REAR MID
OUTPUT” jacks. Set the control to the “MIN” position and slowly adjust
it until the desired level of midrange output is achieved for the amplifier/
speaker system being used.
8
MIDRANGE LEVEL CONTROL
This control is used to adjust the output level from the “MIDRANGE
OUTPUT” jacks. Set the control to the “MIN” position and slowly adjust
it until the desired level of midrange output is achieved for the amplifier/
speaker system being used.
9
HIGH LEVEL CONTROL
This control is used to adjust the output level from the “HIGH OUTPUT”
jacks. Set the control to the “MIN” position and slowly adjust it until the
desired level of high frequency output is achieved for the amplifier/
speaker system being used.
bl
SUBWOOFER LOW-PASS FREQUENCY CONTROLS
These controls (one each for the right and left channels) are used to set
the low-pass filter crossover frequency in the Subwoofer section of the
unit. The frequencies
below
the setting of these controls will be passed
through the crossover to the “SUBWOOFER OUTPUT” jacks. Adjust the
controls as appropriate for the woofer-to-midrange crossover frequency
of the speaker system being used.
bl
REARMIDRANGEHIGH-PASSFREQUENCYCONTROLS
These controls (one each for the right and left channels) are used to set
the high-pass filter crossover frequency in the Rear Midrange section of
the unit during 2-way operation. The frequencies
above
the setting of
these controls will be passed through the crossover to the “REAR MID
OUTPUT” jacks. Adjust the controls as appropriate for the woofer-to-
midrange crossover frequency of the speaker system being used.
bn
MIDRANGEHIGH-PASSFREQUENCYCONTROLS
These controls (one each for the right and left channels) are used to set
the high-pass filter crossover frequency in the Midrange section of the
unit during 3-way and 4-way operation. The frequencies
above
the
setting of these controls will be passed through the crossover to the
“MIDRANGE OUTPUT” jacks. Adjust the controls as appropriate for the
woofer-to-midrange crossover frequency of the speaker system being
used.
bo
MIDRANGELOW-PASSFREQUENCYCONTROLS
These controls (one each for the right and left channels) are used to set
the low-pass filter crossover frequency in the Midrange section of the unit
during 3-way and 4-way operation. The frequencies
below
the setting of
these controls and
above
the setting of the Midrange High-Pass
