-12-
Frequency Control
bm
will be passed through the crossover to the
“MIDRANGE OUTPUT” jacks. Adjust the controls as appropriate for the
midrange-to-tweeter crossover frequency of the speaker system being
used.
bp
HIGHHIGH-PASSFREQUENCYCONTROLS
These controls (one each for the right and left channels) are used
to set the high-pass filter crossover frequency in the High Frequency
section of the unit during 3-way and 4-way operation. The frequencies
above
the setting of the High High-Pass Frequency Control will be
passed through the crossover to the “HIGH OUTPUT” jacks. Adjust
the controls as appropriate for the midrange-to-tweeter crossover
frequency of the speaker system being used.
bq
FUSE
The circuitry of the crossover is protected from damage by an automotive-type fast-
blow fuse. If fuse replacement is necessary, use only fuses of the same
ampere rating (1 Amp.) as originally supplied with the unit. The use of fuses
with incorrect ratings may cause serious damage to the crossover. If fuses
blow consistently, carefully check all electrical connections to the unit.
br
REMOTESUBWOOFERLEVELCONTROL
This control allows adjustment of the output level from the “SUBWOOFER
OUTPUT” jacks from a remote location (under the dashboard, in the glove
box, etc.). The operation of this control will depend on the setting of the
Subwoofer Level Control
6
on the crossover. Carefully adjust the control
on the crossover to find the setting that permits the desired range of
adjustment from the Remote Control.