-4-
5. Output Connections
Connect the low-level output jacks from the crossover to the low-level inputs of the amplifier(s) in the system. For 2-way systems, use the
"SUBWOOFER OUTPUT" and "REAR MID OUTPUT" jacks (see page 5). For 3-way systems, use the "SUBWOOFER OUTPUT", "MIDRANGE
OUTPUT" and "HIGH OUTPUT" jacks (see pages 6 and 7). For 4-way systems, use all 4 sets of output jacks (see pages 8 and 9).
6. Remote Subwoofer Level Control
The Remote Subwoofer Level Control is connected to the crossover by means of a 16' 4-wire cable (supplied). Plug one end of the cable into
the socket on the rear of the Remote Control, route the cable to the crossover and plug the other end into the mating socket on the crossover.
NOTE:
Do not attempt to shorten the Remote Control cable. If there is excess length, bundle it neatly and tie up in an inconspicuous location.