7
*
Function control is available on the unit and the Remote Control.
**
Function not available in this model.
1. POWER*
Press this button to turn the unit ON and OFF.
2.
MONITOR SELECT
M1 Button –
Sets the remote control code to allow control of the unit set to M1 mode.
M2 Button** –
Sets the remote control code to allow control of the unit set to M2 mode.
3.
SOURCE*
Each time the button is pressed, the unit will select various sources in the following
sequence: (DVD/USB, AV1, AUX and GAME).
4.
TV Mode Select
Switches certain function keys on the remote control for monitor functions.
5.
DVD Source
This button is only active when remote control is in DVD mode. Each time the button is pressed one of the source (DVD or USB) will
be selected. If the USB is not plugged in, it will remain on DVD source. Press to change source in sequence of DVD > USB.
6. PIX ( Picture Select )
Each time this button is pressed, the OSD picture adjustment displays the “Adjustment Bar” for BRIGHTNESS, CONTRAST, COLOR,
TINT or RESET. Once the desired adjustment bar is displayed, use the VOLUME (+)/VOLUME (–) button to adjust the setting. The
display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed.
7. SYSTEM MENU
Allow the user to access the system menu. Press cursor (
pq
) buttons to select desired screen mode, FMM frequency, OSD language and
source default during power up.
8. CURSOR (
pqtu
)
Use these buttons to access menu selections on the screen.