Model APS-45
Installation Manual
Keyless Entry System
With Two Auxiliary Outputs
Installation Instructions
This Unit Is Intended For Installation In Vehicles With
12 Volt Negative Ground Electrical Systems Only.
Kit Contents:
w
APS-45 Control Module
w
(2) - Two Button Transmitters
w
4 Channel Code Learning Receiver
w
On Board Antenna
w
(1) - Multi Pin Input/Output Harness
w
(1) - Three Pin Door Lock Harness
w
(1) - Two Pin LED Indicator
w
(1) - Two Pin Valet / Override Switch
w
(1) - 10 Amp In-line Fuse Holder With Fuse
w
(1) - 5 Amp In-line Fuse Holder With Fuse
w
(1) - Installation Manual
w
(1) - Operator's Manual
w
(1) - Limited Warranty
w
(2) - Window Decals
