Page 2
YOUR “ ANTI -CODE GRABBING “ TRANSMITTERS
The transmitters included with your new remote start system use the most advanced and
secure form of radio frequency transmission available on any current automotive remote
system. Some of today’s sophisticated auto thieves use a device known as a code
grabber, which will receive and store the signal from your keychain transmitter, and
re-transmit at a later time to disarm your system.
Your anti-code grabbing transmitters will change their signal every time the button is pressed,
so when a thief grabs then re-transmits your signal, the remote system
will not
respond.
If your transmitter button is pressed more than fifty times while it is out of range of the
vehicle ( children playing with your keys ), the transmitter will not operate when you return
to the vehicle, and will need to be re-aligned to the receiver. To do this, simply press the
Lock/Unlock button two times within a one second time period. The system will now
respond to that transmitter each time a button is pressed.
For reference the transmitter packaged with your PRO-9175FT is shown with Icons which
reference the functions of your system.
KEYLESS ENTRY
1. To lock or unlock the doors simply press and release the transmitter button
with the Lock/Unlock symbols as shown.
If the doors are locked, they
will unlock. If the doors are unlocked, they will lock. As a keyless entry unit,
for your convenience, the parking lights will flash once when the doors are
locked and twice when the door are unlocked.
If the optional Illuminated entry feature has been added, when
unlocking the doors the interior light will turn on and remain on for
30 seconds or until the key is turned on.
ADDITIONAL REMOTE FUNCTION (CHANNEL 2)
This system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press and hold the transmitter button with the Trunk/Key
symbols as shown,
for 4 seconds.
NOTE:
The feature that has been added to channel 2 will always be activated using the
same transmitter button that remotely starts the vehicle. There is no way to move the
channel 2 function to a different transmitter button.
ADDITIONAL REMOTE FUNCTION (CHANNEL 3)
This system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press and release the transmitter button with the word
Option on it as shown.
The optional accessory will immediately engage.
SAFETY (Red Handled ) CONTROL SWITCH
The control switch allows you to temporarily disable the remote starting function of your
