128-8856b
4 of 4
4
To purchase replacement transmitters
or to get additional product information go to:
www.pursuitcarsecurity.com
© 2013 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788
128-8856b
c. From b, press and release the valet/programming button 1 time to get to
channel 7, then press any unused transmitter button or button combination
to program.
NOTE:
Not all systems have channels above 3, check with your installation center
for options your system may or may not have.
NOTE:
Certain systems have the ability to utilize channels 6 & 7 for driver
priority programming. For driver priority, the vehicle must be equipped
with this feature, and the optional feature must be set up and installed
by your installation center. Once this feature is added when the unlock
button of transmitter 1 is used, it will set driver 1 priority, and when the
unlock button of transmitter 2 is used it will set driver 2 priority. In this
situation, the unlock button can be programmed into two receiver
channels, unlock, channel 2 and driver priority 6 or 7. In no other
circumstance will the system allow a transmitter button to be
programmed into 2 receiver channels at the same time.
FUNCTION SETTING CHART
To be completed by installer:
Run Time
5 Min
10 Min
15 Min
20 Min
While Running Unlock Yes
No
Lights
Pulse
Steady
