Congratulations on your purchase of the PRO 9232 automotive Keyless Entry Upgrade
Alarm System. The PRO 9232 is a state - of - the - art auto security system that is
designed to automatically arm and disarm when it receives a command from your
existing Factory Keyless Entry Transmitter. Taking a few moments to read this manual
will help to ensure that your vehicle is protected at all times.
ARMING THE SYSTEM : ( ACTIVE )
1. Turn the ignition key off, exit the vehicle, and close all doors.
2. Press and release the Lock button on the keychain transmitter.
3. The siren and or horn will beep one time, the parking lamps will flash one time, and
the red dash mounted L.E.D. will begin to slowly flash, indicating that the system
is ARMED.
NOTE: If the unit beeps three times when arming, then one of the entry points
( hood, trunk, or doors ) has been left opened. Closing the hood, trunk,
or door will correct the problem, and the system will emit a single chirp
to confirm that the problem has been corrected. Additionally, if illuminated
entry is a feature of the Factory Keyless Entry system, the alarm may chirp
3 times every time the system is armed, and chirp one additional time
when the interior light turns off to confirm that all trigger zones are fully
operational.
4. Any time the door lock switch in the vehicle is used to lock the doors while the
ignition key is turned off, the system will immediately arm. To lock the doors after
entering the vehicle, make sure the ignition key is switched on first. Turning the
ignition key on first will stop the system from arming.
ARMING THE SYSTEM : ( PASSIVE )
1. Turn the ignition key off, exit the vehicle, and close all doors.
2. The dash mounted L.E.D. will begin to flash rapidly, indicating that the system is
automatically ( passively ) arming. As an added convenience, the 30 second
automatic passive arming will not begin until all doors are closed, allowing passengers
to exit the vehicle at their convenience.
Model PRO 9232
OWNER’S MANUAL
KEYLESS ENTRY ALARM UPGRADE MODULE
