8
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the
Select knob
3
five times so the “FAD” indication appears on the display panel. Within
5 seconds of choosing the Fader mode, turn the knob clockwise to fade the sound to
the rear speakers or counter-clockwise to fade the sound to the front speakers. The
fader position will be shown by the bars on the display panel from
F
R ( full front ) to F
R ( full rear ). When
the volume level between the front and rear speakers is equal,
F
R will be shown on the display panel. The display will auto-
matically return to the volume indication 5 seconds after the last adjustment is
made.
9
AM/FM BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication “AM”,
“FM1”, or “FM2” will appear on the display panel according to your selection.
bl
MANUAL UP/DOWN TUNING (
TUNE
)
AUTOMATIC SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning (
) side
of the button to advance the unit one digit higher or the Down Tuning (
) side
of the button to tune downward. Continue to press either side of the button to
tune the radio rapidly in the selected direction.
Pressing either side of the button for longer than 0.5 seconds and then releasing
will activate the Automatic Seek Tuning function in the selected direction. The
radio will seek the next available station and stop at that frequency. The Seek
function can be stopped by pressing the button again or activating any other
tuning function.
bm
AUTO-STORESYSTEM(AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 5 stations pre-set into the memories
of the AM band or the 10 stations of the FM band. The unit will stop at each pre-
set station for 5 seconds before continuing to the next pre-set station (the pre-
set number on the display panel will flash during this operation). Press the button
again momentarily to stop the Pre-Set Scan operation and remain on the
selected frequency.
Pressing the button for longer than 2 seconds will activate the Auto-Store
System (AS) which will automatically scan and enter up to 5 stations into the pre-
set memories on the band in use. If you have already set the pre-set memories
to your favorite stations, activating the Auto-Store function will erase those
stations and enter the new ones. This feature is most useful when travelling in
a new area where you are not familiar with the local stations.
bn
STATION PRE-SET MEMORIES
To set any of the 5 pre-set memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down or Automatic
Seek Tuning Controls
bl
.
-3-
-
--
-
-
--
-
