11
Specifications**
Inputs
4 A/V inputs (RCA)
Input Signal Level
Audio:
Up to 3 V p-p (10,000 ohms)
Video:
1 V p-p (75 Ohms)
Outputs
5 A/V outputs
1 Audio Output
Output Signal Level
Audio:
Up to 3 V p-p (10,000 ohms)
Audio S/N ratio:
Greater than 60 dB
Video:
1 V p-p (75 Ohms)
Video S/N ratio:
Greater than 55 dB
DC Input (Battery):
10 – 16 VDC (Battery wire - 10 Amps Max)
DC Input (Accessory):
10 – 16 VDC (Accessory wire – 1 Amp Max)
12 VDC Source Current Capability:
Input Source 1 through 4:
2 Amp Max each for Source Components (DVD, VCP etc.) *
Output Source 1 through 5: 1.5 Amps Max each for LCD screens, etc. *
* Each 12 VDC output jack is protected with an electronic fuse. If the current capability of the jack is
exceeded, the fuse will open up. Remove the overload and wait 15 minutes for the fuse to reset. If
it is necessary to supply more current than the output jack is rated, use an automotive relay. Wire
the coil to the output jack and ground and hardwire the 12 V Accessory to the common terminal of
the relay and wire the N.O. terminal of the relay to the load.
** Specifications subject to change without notice.
