10
G. Loading and Playing a Disc
a. After connecting power to the unit, slide the POWER ON/OFF on
the right side to ON, the DVD player’s POWER indicator lights.
b. Open the disc tray by pressing OPEN at the lower right of the disc
tray, and place a disc into the tray with the disc’s label facing up.
c. Press at the right side of the door until it clicks shut. The unit will
load the disc and start playing.
d. Rotate BRIGHT and VOLUME to adjust the LCD’s brightness and
the DVD player’s volume.
e. To stop playing a disc, press STOP.
f. To turn off the DVD player, slide POWER ON/OFF to OFF. The
DVD player’s POWER indicator turns off.
g. To remove the disc, open the disc tray, then you will see a
picture on the right inner corner of the cover to indicate how to
remove the disc, just use your finger to access the right inner
corner of the disc tray and lift up the disc and remove it from
the disc tray. Please refer to Figure 6.
Figure 6
