Audiovox VDS102T, Operation Manual

6

1. Infrared Sensor

 – Allows the remote control to  operate the VDS102T and to control the DT102 

when docked.  

2. Three position Dome Light Switch

• Auto – Automatically  switches  on  the  dome  lights  in  conjunction  with  the  vehicle’s  interior 

illumination.

• Off – 

The dome lights will not turn on in this position.

• On – 

Turns on the dome lights.

3. Dome Lights –

 Provide additional interior illumination.

4. Channel (

5

) Button –

 Used this button to increase the channel number to the desired number.

5. Channel (

6

) Button –

 Used this button to decrease the channel number to the desired number.

6. Auto Program Button –

 Allows the user to scan and store active TV stations into memory.

7. Screen Release –

 Moves in the

direction of the arrow to release the drop down screen.

8. Shuttle Shut-off Switch –

 Turns off the DT102 when closed.

9. Security Lock Knob –

 Used to ensure that the shuttle is not released accidentally.

10. 24 Pin Signal Interface Connector –

 Used to connect the shuttle to the docking station.

11. Shuttle Release –

 Press to release the shuttle from the docking station.

12. POWER Button

–

 Used to turn the system ON/OFF. Bright red when system is on, dim when off.

13. FMM Select Button –

 When this button is pressed it will turn on the wireless FM Modulator and

then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz;
Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).

14. Source Select Button –

 Used to select one of the three sources (DVD, AV1, TV)

Controls Function Descriptions