The FS-QR120E is a quick-release demountable floor stand with integrated
lifting mechanisme that raises the flat panel out of the flightcase for you.
Check at arriving of your package that your product
isn’t damaged.
Whit damage please repoprt direcly to the transporter and Audipack to provide
a quick solution.
It is importand that at first use the lowest lifting head position is set to the
correct height. This is importand because the cams on the back of the Audipack
bracket on the back of the flat panel should corresond with the key holes of the
llifitng head in lowest position.
Please read the manual in full before starting to assemble the floor stand.
1.
Take away both flightcase lids and assemble the floorstands floor plate on the desired
position.
Make sure the floor plate is positioned on a level and flat surface.
2.
Install the 2 lower columns on the floor plate.
Take a way the C-formed covers (if needed) and secure the poles with the lock.
Be sure to install the colums
with the “lip” fr
ont wards (see picture).