Installation instruction Rota-Kit series
The Rota-Kit is available in various version and are suitable for directing projectors to
projection screens and flat screens towards public. With the 4 free programmable
positions (within 350 degrees), the projector or flat screen can be pointed at any desired
direction.
To mount projectors or flat screen one of the option above mentioned are needed.
Lock the option firmly with the screw and alan key. This prevent unwanted rotation.
Accuracy of positioning:
When the projection screens are beeing installed before the Rota-Kit, the following tolerance
can occur. The tolerance is caused by the resolution of the digital measurement of the Rota-
Kit and the position of the screen. Ones the positions are set, the acuuracy of positioning will
be very high. See below the tolerance measured out in a scheme.
Projection tolerance when pointing on a :
Projection distance
Possible dislocation
at positioning
Tolerance afther
placement
5 meters
10 mm
+/- 1 mm
10 meters
15 mm
+/- 2 mm
15 meters
20 mm
+/- 4 mm
20 meters
25 mm
+/- 8 mm
The tolerance is the difference between the programmed position and the actual reached position compare with the already installed
screen. The shown tolerances are indicated and can only be less then shown.
