Use minimal 3 bolts or screws to fsten the Rota-Kit.
2
.
Screw the keeper on the axis of the Rota-Kit. The type of keeper determines the choice of
load on the Rota-Kit. Screw it on firmly (without tools) and lock the inserts with an
allen-key..
3.
Connect the Rota-Kit according the scheme below:
Function
Wire combinaton
Key board position
Store
C + S
Rotate Left
C + L
Rotate Right
C + R
(Go to) position 1
C + 1
(Go to) position 2
C + 2
(Go to) position 3
C + 3
(Go to) position 4
C + 4
C = common.
Use only potential free contact closures to make the connection.
Max. control cable length aprox. 30 meters, Minimum shielded cable thickness 0.75
mm3.
