Programming the second position:
Rotate the Rota-Kit to the second position. Programm this accurat position.
Confirming and programming the first position:
Return to position 1, bij using the start or fence and reprogramm position
.
In this case the accuraty between position
and
is consistant.
Finally position
and
can be set.
Note:
Mount the projector (or other AV equipment) cables in a way that they are clear from moving
parts.
4b.
Mount the monitor bracket to the flat screen. Mount this assembly to the rota-kit.
Connect the power adapter to the Rota-Kit.
The Rota-Kit will automatically go to it’s “0” position.
Refer 4a for programming the positions.
Using the Rota-Kit with a remote controll.
When the Rota-Kit is used with the optional 260218 (IR) or 260219 (RF) remote please refer
to the installation manual of the print set.
In case 4 positions are controlled by a remote controll, do not press the upper or lower
“general activation” button .
This button with try to activate all 4 positions in 1 time. The Rota-Kit will not respond to that
and stall.
