General important announcements:
When the power is taken of from the system in static position.
The Rota-
Kit will slowly return to it’s “0” position. After “homing” the
programmed position can be activated again. There’s no need for
reprogramming. The Rota-Kit will perform normal speed (inclusive slow-
start and slow-stop).
When the power is taken of from the system in during rotation.
The Rota-
Kit will slowly return to it’s “0” position. After “homing” the
programmed position can be activated again. There’s no need for
reprogramming. The repositioning to the first chosen position will
proceed with 30% speed.
A.
When persons are close or nearby the Rota-Kit it is obligated that the operator has constant visual
contact with the lift during it’s travel.
B.
The control panel must be installed or positioned in the way that the operator has constant visual
contact with the Rota-Kit
during it’s travel.
C.
The Rota-Kit is not suitable for rotating persons.
D.
It is allowed to mount 1 piece of equipment, keeping the allowed max. load of the Rota-Kit in mind.
E.
When more equipment needs to be installed, the equipment must be assembled in a way that they are
mounted together as 1 piece on the Rota-Kit, keeping the allowed max. load in mind.
F.
When loads are mounted on the Rota-Kit it is important that the point of gravity of the load is centred
under the Rota-Kit.
G.
When the Rota-Kit is faulty during normal use or during testing, it must be put out of function
immediately. The repair must be done by a approved engineers. Clearance of the product after repair
must be given by authorised and trained engineers.
H.
When the product is being changed or mechanically altered, the warranty will end immediately.
