Settings
20
14.3
Rotary switch positions versus product examples
Rotary switch on position “0” = MKT-150WS, MKT-200WS, MKT-250WS,
MKT-265WS
Rotary switch on position “1” = FFCL-XXXX, Column lifts
Rotary switch on position “2” = PRK-250, PRK-500, PRK-750, PCL-M350,
PCL -X350 and MKT-C150
Rotary switch on position “3” = PRK-250, PRK-500, PRK-750, PCL-M350,
PCL -X350 and MKT-C150
Rotary switch on position “4” = Universal AC tube motors
Rotary switch on position “5” = PCL-1070, PCL-2050, PCL-3050, PCL-5050
Switches and position control, manual
(4 & 5 not applicable on PCB 261377)
15
Function dipswitches (J14)
Dipswitch position 1 =
Master/slave - slave “on” (in twin-mode only)
Dipswitch position 2 =
Single/twin - single mode “on”
Dipswitch position 3 =
Soft start/stop on/off - soft start/stop “on”
Dipswitch position 4 =
Pulse/continue - pulse “on”
!! When pulse is “on”, the direction buttons are working as a latching switch !!