33
USER'S MANUAL
11.
Processor outputs (Ch1÷Ch13 IIR MODE)
assignment.
The bit One HD Virtuoso features 13 output
channels. On this specific step of the procedure,
any signal can be assigned to each output
channel.
E.g.:
the outputs 1 and 2 can be assigned to the
rear channels simply to avoid having to
lengthen the cables going to the specific
amplifier.
For a matter of convenience, if the output 1 is
assigned to the left woofers, the software will
automatically assign the output 2 to the right
woofers. If during the procedure the output 1 is
assigned also to the left mid-high speakers, the
software will show a warning message. Change
the allocation of one of the two numbers marked
in red and the software will automatically select
the first available channel.
Press
BACK
to go back to the previous step.
Press
NEXT
to continue with the configuration.
Press
CANCEL
to exit.
10.
Selection of passive crossovers for speaker groups
The presence of passive crossovers
managing speaker functional groups in
complex systems can be provided by the
user.
E.g.:
the 3-way Front can be managed as
-
multi-amplified
(6 output channels would be required);
-
passive mid-high sp separately
amplified woofer
(4 output channels would be required);
-
3-way passive
(2 output channels would be required).
While performing the setup, the software
will automatically notify the return within
the 8 output channel limit, the warning
message will then disappear and the
NEXT
button will appear.
-
Press
BACK
to go back to the previous step.
-
Press
NEXT
to continue the configuration.
-
Press
CANCEL
to exit.
7
