53
USER'S MANUAL
6.
Auto Chimes:
activate this function by ticking the
Enable
box to switch
to the main Master input each time a “Gong Signal” coming from the car
should be heard.
Functions Description:
A.
Threshold:
function to set the minimum threshold level of the “Gong Signal”
coming from the Head Unit Master input.
The operation levels range from 0 dB to -96 dB.
Advanced menu
Selecting the box as shown in the picture to the side the advanced setup menu
is activated, essential when adjusting the “Auto Chimes” function.
A.
Attack:
function to set the starting time for the auxiliary input to activate
The operation levels range from 13 ms to 680 ms.
B.
Release:
function to set the turn off time of the auxiliary input activated.
The operation levels range from 13 ms to 6800 ms.
7.
Power-On From HiLev:
select this entry to activate the bit One HD Virtuoso
turn on using a high level signal
(ART, Auto Remote Turn On)
, available on
the
CH1
and
CH2
channels.
8.
Master Delay Compensation:
select this entry to enable/disable the
Head Unit time delays compensation. This function is available if during
the
“I/O Configuration Wizard”
phase the
“Master Input Delay”
procedure
has been performed
9.
Startup/Shutdown Delays:
function to modify the bit One HD Virtuoso startup
and shutdown delays.
• StartUp Time:
delay between the device startup and the output
audio turn on. Each amplifier, when starting up, has its own delay before
becoming operative. By setting the Startup Time to a value equal to or
higher than the longest of these delays a synchronized startup of the
audio of the entire system can be achieved.
• Shutdown time:
delay between the turn off/deactivation of the REMOTE OUT
signal to the amplifiers and the bit One HD Virtuoso shutdown. Acting on this
parameter is not generally essential but it could useful to decrease it when
amplifiers in the system produce a “Bump” while shutting down.
10.
Language:
to change the language select your preference among the ones available on the menu.
8