27
7)
Confirm the entry with the OK button, after moving the pointer to the name box.
8)
Select the “Save Change” function and then exit the “SETUP” menu with the remote control <> button and wait
for a few seconds.
1.
Before turning the bit Play HD on, check and make sure that the Wi-Fi USB dongle is inserted into the
device
“
Wi-Fi USB
” plug
(see section 4.7)
.
2.
Connect the power and turn the bit Play HD on; check and make sure that, once started, a
Wi-Fi
connection
is
available
(see section 5.1)
. If not, restart the device and check if the Wi-Fi USB dongle is correctly inserted.
3.
From the Home window of your Android device, select in sequence
Menu
,
Settings
,
Wireless and Networks
.
4.
Select
Wi-Fi Settings
and then
Wi-Fi
to enable the wireless antenna. Select the
Wi-Fi
menu, wait for your
mobile device to detect the available
Wi-Fi
networks and select the network and the password previously set
up in the bit Play HD.
REMARK:
if the device user name and password have not been changed the default ones are:
User
name:
bit Play HD
Password:
00000000
5.
The Android mobile device is now correctly set up and ready for use.
B) Android device setup in “Hotspot” mode.
USER’S MANUAL
bit Play HD /
6
WARNING:
after the operating mode (HOT SPOT) is enabled and saved, we recommend to reboot the bit Play HD.
