102
INACTIVE STANDBY FEATURE
In order to minimise the energy consumption when the radio is not in use, your radio includes
an automatic Inactive Standby feature. This is designed to put your radio into standby if it
detects that it is no longer being used in the Internet radio mode when streaming is stopped,
or Music player mode when music playing is stopped, or Auxilary input mode when there is
no audio input signal.
If any of these conditions is detected for more than 10 minutes, then the radio will start a
5-minute countdown before entering standby. The display will show the time remaining. After
15 minutes of inactivity the radio will enter standby with the clock being displayed.
Pressing any button or resuming listening during the 15 minutes period will reset the standby
timer.
CLOCK AND ALARMS
AUTOMATICALLY UPDATING THE CLOCK
Audisse Shirudo will normally update the clock automatically when connected to the internet.
If you enter a time setting manually, the sound system will calculate a local time offset,
which is then stored in memory. Whenever it synchronises the clock using the internet,
including after a power failure, Audisse Shirudo will then set the clock automatically using this
information.
You may wish to use the sound system away from the internet, in which case you may
specify that the unit sets its clock from DAB or FM radio broadcasts. After a power failure the
radio will then set its clock the next time that you turn on the radio in DAB or FM mode.
Alternatively you may specify that the time is not automatically updated. In this case the clock
must always be set manually after a power interruption.
1. With Audisse Shirudo switched on, press the Menu button to access the menu for the
current mode.
2. Rotate the Tuning/Seek/Select control until ‘System settings’ is highlighted on the display.
Press the control to enter the system settings menu.
Standby in 5 minutes.
Please press
any button to cancel.
SOURCE
MENU
FWD.
BACK
INFO
TUNING
SEEK/SELECT
VOLUME
EQUALIZER
PRESET
PRESET
-
PRESET
+
