M55D v1.2
© 2019 Audix Corporation. Audix is a registered trademark of the Audix
corporation. Specifi cations subject to change without notice.
For service
and warranty information, visit AudixUSA.com/service or call 800.966.8261
FIGURE 10
1. Mic ID will show model number
by channel
2. Starting “state” LED color can be
selected
3. Gain control
4. High pass fi lter
5. Low pass fi lter
6. See Q-SYS™ designer asset manager
Audix help fi le for detailed instructions
FIGURE 9
1. Open Dante controller to confi rm
discovery on your network
2. If using Q-SYS™ DSP open Designer
Asset Manager and Dowload Audix
Plugin
3. Open Audix Plugin
4. See Figure 10 for Q-SYS™ control and
LED functions
5. For DSP’s currently without Audix
plugin, audio channels can be routed
through the Dante controller.
6. See tech support at audixusa.com for
updated API / Plugin information
FIGURE 7
For desired microphone coverage
and position, loosen M55D knurled
nut (aprox. half-turn), adjust cable
length, and retighten nut.
OPERATION OVERVIEW
FINAL ADJUSTMENT
1
2
3
4
5
M55
