MOUNTING AND WIRING INSTRUCTIONS
FOR M70
To adjust microphone,
unscrew the grill assembly.
Wiring:
1 = Ground
2 = Blue (+)
3 = Yellow (-)
Open lid of junction box.
Separate the supplied 3 pin
connectors (male/female).
Connect terminal connectors.
Insert plenum cable through
strain relief nut, then connect to
the terminal.
Recommended cable:
Belden 9451P - .124" O.D. or
Belden 82761 - .116" O.D.
Tighten down the strain relief
nut to hold wire firmly in place
and close junction box lid.
For further information contact Audix at 503.682.6933
www.audixusa.com
3
3
2 1
2 1
6
3
1
4
2
5
Male to Au-
dio Cable
Female to
Mic
