Audizio 102.244 Instruction Manual Download

Page: 12 / 71

Note:

If a USB drive is not recognized, the list of files on the drive is corrupted or a file in the list is not played, please connect

the USB drive to a PC, format the device and try again. The supported file system is FAT12, FAT16 and FAT32. A USB drive
requiring high power (more than 500mA or 5V) is not supported. Compatible audio format: MP3.

To play music from a Micro SD memory card, simply insert a Micro SD card into its port on the front of the radio (with label
side up). Press the home button and navigate to "Micro SD", press

to confirm. It will take a moment to read the Micro SD

card before it can begin playing music. Skip to the next or previous track by rotating the

[Tune/OK]

knob. Press and hold the

[

►

]

[

◄

]

buttons will invoke fast forwarding/rewinding. To pause/play the music, press

[Tune/OK]

. Note: If a Micro SD is not

recognized or does not play properly, the list of files on the device is corrupted or a file in the list is not played, please format
the memory card (all the files will be deleted) and try again. The supported file system is FAT12, FAT16 and FAT 32.
Compatible audio format: MP3.

•

Press the home button, navigate to Alarm and press

, or press

[ ]

on the remote control.

•

Select either Alarm 1 or Alarm 2, choose

Turn on

to activate the Alarm.

•

Follow the alarm wizard instructions to set the alarm.

•

The wizard will guide you through the settings below:

Time

- Set the time for the alarm.

Sound

- You can choose

Wake to Tone

My Favourite, Wake to FM Radio or Wake to DAB Radio

as the alarm source.

Note

Wake to FM or wake to DAB:

Only the preset stations can be used as alarm (if the preset scan has been

completed).

Repeat

- You can schedule the alarm as you desire: Everyday, Once or Multiple Days.

Alarm Volume

- Adjust the volume of the alarm as you like by rotating the

[Tune/OK]

knob or

[

▲

▼

]

button on

remote.

Alarm duration

- There are number of duration choices available. You can set the preferred duration for the alarm to

sound. When the time is due, it wil turn off automatically.

• After the above settings are completed, press the

[

◄

]

button to exit and make sure the Alarm is turned on. You will see the

Alarm icon appear on the display if it is activated.

Note: If the selected alarm source is not available, the

Wake to Tone

will be released.

Stopping Alarm/Activate the Snooze function

When the alarm goes off, press the

[ ]

to stop the alarm or press the

[Tune/OK]

knob to activate the Snooze feature.

When the Snooze is activated, the alarm is muted for 9 minutes and sounds again when the time is due. You can repeat the
process multiple times. To stop the "Snooze" function, press the

[ ]

You can set the timer to let the radio turn to Standby mode after the selected time elapsed (in range of 15 minutes to 180
minutes) There are several timer options to choose from. Press

[

]

on the remote control to set the timer. You will see the

icon appear on the display if the timer is set.

Here you will find the complete range of settings/options available to configure your radio. On the main menu, navigate to
Configuration setting. Press OK and you will see a list of options available.