7
1.
Standby
2.
Number keys
3.
Repeat
4.
EQ-button
5.
Prev.-button
6.
X-Bass
7.
FM Mono/Stereo
8.
DAB/FM
9.
CD/USB
10.
DAB/FM Info
11.
DAB/FM Scan
12.
Display/Pairing
13.
Stop
14.
CD tray open / close
15.
Memory
16.
Time / Clock
17.
Sleep timer
18.
Random
19.
Preset up
20.
Next track
21.
Enter
22.
Folder
23.
Preset down
24.
Mute
25.
BT/AUX
26.
Volume up
27.
DAB/FM Menu
28.
Volume down
29.
Play/Pause
Note:
A type CR2025 battery is already installed in the remote control. Before use, remove the insulation sheet from the
battery as shown below.
1. Unpack the digital radio and remove all packing materials.
2.Completely unwind the power cord and plug it into the wall outlet.
3. Pull out the antenna completely.
When you first connect the unit to the mai
ns socket, display will show the “00:00:00”. If you can receive a DAB+ signal in your
location, the unit will synchronize to the current local time. After approximate one minute, it will switch to STAND BY mode.
•
Press the STANDBY on the unit or on the remote control to switch the unit to ON mode.
•
Press the STANDBY on the unit or on the remote control to switch the unit back to STANDBY mode.
•
Disconnect the mains plug from the mains socket if you want to switch the unit off completely.
Note:
1. If the digital radio is not used for 15 minutes, it will automatically enter into standby mode.
2. AUX mode is used for more than 4 hours, the unit will switch to standby mode.
15 minutes before entering standby mode.
you will be notified with “AUTO
-
OFF” flashing on the display. To extend the AUX
mode you can press RANDOM button."
MANUAL CLOCK SETTING
1.
In Standby mode, press the CLOCK button on the remote control. The hour digits flash on the display.
2.
Press the
or
buttons to adjust the hour digits, and then press the CLOCK button to confirm. The minute digits
will flash on the display.
3.
Press the
or
buttons to adjust the minute digits, and then press the CLOCK button to confirm.
4.
The time is now set.
Note:
Set the time manually if you are not receiving DAB+ signal. As soon as the radio receives DAB+ signal, the time will be
set automatically.
