AUX IN
Connecting to
Audio Source
Requires 3.5 mm audio input cable (not included).
Note: When the Source selector is set to Aux In, When a 3.5mm audio cable is plugged into the unit, it will automatically
detect the input and power ON in Aux In mode.
1. Plug a 3.5 mm audio input
cable into the
Aux In
on the unit and the audio output/headphone output on an MP3
Player or other audio source.
2. Use the controls on your connected music player to select and play audio.
3. Audio played through the connected device will now be heard through the speakers.
AUX cable is not included
1.
Gently pull down the front edge of the needle.
2.
Pull needle forward.
3.
Pull out and remove.
Installing Needle
1.
Position the needle with its tip facing down.
2.
Line up the back of the needle with the cartridge.
3.
Insert the needle with its front end at a downward angle and gently lift the front of
the needle upward until it snaps into place.
The stylus needle is universal
type
and
purchasable on
Amazon.com
.
HOW TO REPLACE THE NEEDLE
The durability time of the recoil needle is about
200-
2
50
hours.
Replace the needle if
necessary.
Remove the
Needle
8
